We are happy to announce that Bentley SewerGEMS V8i (SELECTseries 3) is now available for download on selectservices.bentley.com (build 08.11.03.77). SELECT subscribers can log in and download the new product directly from Bentley's website. This is a significant release with a number of key new features. Highlights of these features include:

Common file format with other Bentley's sewer and stormwater products:

With SewerGEMS, SewerCAD, CivilStorm, and StormCAD's new unified file format, the .stws file replaces the .swg, swc, csd and .stc files. This common file format makes modeling teams’ workflows more efficient, since a model created in any one of these products can now be seamlessly opened and edited in another.

Updated support for MicroStation, AutoCAD and ArcGIS platforms:

You can run SewerGEMS from within MicroStation V8i (SELECTseries 3), ArcGIS 10 and 10.1 or AutoCAD 2013 (32- and 64-bit).

i-model publishing:

SewerGEMS can now publish i-models (containers for the open exchange of infrastructure information) in 2D or 3D.

Multiple solvers:

The SewerCAD and StormCAD solvers (gradually varied flow convex and gradually varied flow rational) are now included in SewerGEMS, making SewerGEMS a full superset of SewerCAD, StormCAD, and CivilStorm.

Automated design:

SewerGEMS now offers automated constraint-based design capabilities for sanitary and storm sewers.

LID elements:

Low-impact development (LID) controls can now be analyzed in SewerGEMS.

See the What’s New page for more: http://www.bentley.com/en-US/Products/SewerGEMS/Whats-new.htm. Additional information one the items above and other new or updated features will be included in a "What's New" TechNote which will be available soon from the Hydraulics and Hydrology TechNotes and FAQs page (http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/selectsupport-technotes-and-faqs.aspx).

(Note that the SELECTseries 3 release of CivilStorm, StormCAD and SewerCAD will follow in the soon.)

We are happy to announce that Bentley StormCAD V8i SELECTseries 3 is now available for download on selectservices.bentley.com (build 08.11.03.77). SELECT subscribers can log in and download the new product directly from Bentley's website. This is a significant release with a number of key new features. Highlights of these features include:

Common file format with other Bentley's sewer and stormwater products:

With SewerGEMS, SewerCAD, CivilStorm, and StormCAD's new unified file format, the .stws file replaces the .swg, swc, csd and .stc files. This common file format makes modeling teams’ workflows more efficient, since a model created in any one of these products can now be seamlessly opened and edited in another.

Updated support for MicroStation, AutoCAD and ArcGIS platforms:

You can run StormCAD from within MicroStation V8i SELECTseries 3 and AutoCAD 2012 and 2013 (32- and 64-bit). Note: An AutoCAD license is required to integrate with AutoCAD. If you don't have an AutoCAD license, you can choose to run StormCAD in its stand-alone mode. In addition, in order to integrate with a 64-bit version of AutoCAD, the 64-bit version of Microsoft Office is required.

StormCAD now offers support for interoperability with the latest releases of InRoads, GeoPAK,
LandXML, Bentley MX Drainage, and ProjectWise.

i-model publishing:

StormCAD can now publish i-models (containers for the open exchange of infrastructure information) in 2D or 3D.

Enhanded element type support:

StormCAD now supports ponds as elements. StormCAD has the ability to handle all element types, gravity as well as pressure. StormCAD now supports inlet controlled culverts.

New gutter shapes, v-shaped and parabolic gutters, are now available in StormCAD. A new gutter and cross section catalog referencing is now supported in StormCAD.

Keyword search in property grid:

Users can find the property they want quickly in the property grid using keyword search.

See the What’s New page for more: http://www.bentley.com/en-US/Products/StormCAD/Whats-new.htm. Additional information one the items above and other new or updated features will be included in a "What's New" TechNote which will be available soon from the Hydraulics and Hydrology TechNotes and FAQs page (http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/selectsupport-technotes-and-faqs.aspx).

(Note that the SELECTseries 3 release of CivilStorm and SewerCAD will follow soon.)

We are happy to announce that Bentley CivilStorm V8i SELECTseries 3 is now available for download on selectservices.bentley.com (build 08.11.03.77). SELECT subscribers can log in and download the new product directly from Bentley's website. This is a significant release with a number of key new features. Highlights of these features include:

Common file format with other Bentley's sewer and stormwater products:

With SewerGEMS, SewerCAD, CivilStorm, and StormCAD's new unified file format, the .stws file replaces the .swg, swc, csd and .stc files. This common file format makes modeling teams’ workflows more efficient, since a model created in any one of these products can now be seamlessly opened and edited in another.

Updated support for MicroStation and AutoCAD platforms:

You can run CivilStorm from within MicroStation V8i (SELECTseries 3) or AutoCAD 2012 and 2013 (32- and 64-bit).

i-model publishing:

CivilStorm can now publish i-models (containers for the open exchange of infrastructure information) in 2D or 3D.

Multiple solvers:

The StormCAD solver (Gradually Varied Flow-Rational) is now included in CivilStorm, making it easier to compute StormCAD models in CivilStorm.

Automated design:

CivilStorm now offers automated constraint-based design capabilities for sanitary and storm sewers through the GFV-Rational Solver.

LID elements:

Low-impact development (LID) controls can now be analyzed in CivilStorm.

Enhanded element type support:

New gutter shapes, v-shaped and parabolic gutters, are now available in CivilStorm. A new gutter and cross section catalog referencing is now supported in CivilStorm.

Keyword search in property grid:

Users can find the property they want quickly in the property grid using keyword search.

See the What’s New page for more: http://www.bentley.com/en-US/Products/CivilStorm/Whats-new.htm. Additional information on the items above and other new or updated features will be included in a "What's New" TechNote which will be available soon from the Hydraulics and Hydrology TechNotes and FAQs page (http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/selectsupport-technotes-and-faqs.aspx).

(Note that the SELECTseries 3 relear of SewerCAD will follow in the soon.)

We are happy to announce that Bentley SewerCAD V8i SELECTseries 3 is now available for download on selectservices.bentley.com (build 08.11.03.77). SELECT subscribers can log in and download the new product directly from Bentley's website. This is a significant release with a number of key new features. Highlights of these features include:

Common file format with other Bentley's sewer and stormwater products:

With SewerGEMS, SewerCAD, CivilStorm, and StormCAD's new unified file format, the .stws file replaces the .swg, swc, csd and .stc files. This common file format makes modeling teams’ workflows more efficient, since a model created in any one of these products can now be seamlessly opened and edited in another.

Updated support for MicroStation and AutoCAD platforms:

You can run SewerCAD from within MicroStation V8i (SELECTseries 3) or AutoCAD 2012 and 2013 (32- and 64-bit).Note: An AutoCAD license is required to integrate with AutoCAD. If you don't have an AutoCAD license, you can choose to run StormCAD in its stand-alone mode. In addition, in order to integrate with a 64-bit version of AutoCAD, the 64-bit version of Microsoft Office is required.

i-model publishing:

SewerCAD can now publish i-models (containers for the open exchange of infrastructure information) in 2D or 3D.

LID elements:

Low-impact development (LID) controls can now be analyzed in SewerCAD.

Enhanded element type support:

SewerCAD now supports ponds as elements. SewerCAD has the ability to handle all element types, gravity as well as pressure. SewerCAD now supports inlet controlled culverts.

New gutter shapes, v-shaped and parabolic gutters, are now available in CivilStorm. A new gutter and cross section catalog referencing is now supported in CivilStorm.

Keyword search in property grid:

Users can find the property they want quickly in the property grid using keyword search.

See the What’s New page for more: http://www.bentley.com/en-US/Products/SewerCAD/Whats-new.htm. Additional information on the items above and other new or updated features will be included in a "What's New" TechNote which will be available soon from the Hydraulics and Hydrology TechNotes and FAQs page (http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/selectsupport-technotes-and-faqs.aspx).

Is it possible in sewergems sanitary that a layer can be provided in which ground elevations are pre predefined so that when I draw a conduit it can automatically pick those elevation?

Edit 4/2/2013: For those who had difficulty finding these patches on our website; this issue should now be resolved. Please use the 'normal' web downloads page, as opposed to the Beta Fulfillment center.

The most current patch sets for the products listed below are now available to download from the "Enhancements and Updates" section of SELECT Downloads webpage. Note that these patch sets must be installed after the full installation of the referenced product version (i.e., software download from "SELECT Released Products" section), and they cannot be used with any version other than that specified.

• Bentley WaterGEMS V8i - Cumulative Patch Set for build 08.11.03.19, posted 3/28/13
• Bentley WaterCAD V8i - Cumulative Patch Set for build 08.11.03.19, posted 3/28/13
• Bentley HAMMER V8i - Cumulative Patch Set for build 08.11.03.19, posted 3/28/13
• Bentley StormCAD V8i - Cumulative Patch Set for build 08.11.03.77, posted 3/28/13
• Bentley StormCAD V8i United Kingdom - Cumulative Patch Set for build 08.11.03.77, posted 3/28/13
• Bentley SewerGEMS V8i - Cumulative Patch Set for build 08.11.03.77, posted 3/28/13
• Bentley SewerCAD V8i - Cumulative Patch Set for build 08.11.03.77, posted 3/28/13
• Bentley CivilStorm V8i - Cumulative Patch Set for build 08.11.03.77, posted 3/28/13

Other items of note:

• All patch sets are cumulative; that is, they contain all available updates for the specific product and version up to the time of posting. You need only install the latest patch set to become current. 
• Many of the newer patch sets require that this update be installed on your machine: Microsoft Visual C++ 2005 SP1 ATL Security Update - http://support.microsoft.com/kb/973923. This update is included with newer operating systems. If needed, this is a one-time-only update.
• The software product must be closed prior to installing the update.
• Patch sets are refreshed on SELECTservices Downloads on a monthly basis.
• For further assistance with software updates and patches, please contact technical support at http://www.bentley.com/serviceticketmanager.

Note that these patch sets must only be installed on a machine where you have the specific product version listed above already installed. They are not compatible with any other version. To check what version you have installed, open the product, go to Help > About. The build number will be in the lower left corner of the dialog in brackets.

Updated patch sets now available for StormCAD, StormCAD for UK, SewerGEMS, CivilStorm, PondPack, WaterGEMS, WaterCAD, and HAMMER

Interested in more details on what's new in the latest versions of Bentley's storm and sewer products? The following Technotes have been recently posted and provide an overview of new features and changes in V8i SELECTseries 3, which was recently release:

SewerGEMS

CivilStorm

SewerCAD

StormCAD

Hi, this message appeared, someone can help me? what can i do?

"51022"Base""Manhole""202""MH-92"(N/A)"There should be only one non-diversion type conduit out of a gravity junction."Hydraulics Validation"

We are happy to announce that Bentley WaterGEMS V8i SELECTseries 4, WaterCAD V8i SELECTseries 4, and HAMMER V8i SELECTseries 4 are now available for download on selectservices.bentley.com (build 08.11.04.50). SELECT subscribers can log in and download the new product directly from Bentley's website. This is a significant release with a number of key new features. Highlights of these new features can be found in the "Readme.pdf" file found in the installation folder (typically C:\Program Files (x86)\Bentley\(product name) and in the "What's New?" TechNotes that will be available soon at the following link: http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/selectsupport-technotes-and-faqs.aspx 

Additional TechNotes that will go into greater detail on some of these new features will also be available soon at the above link.

Thank you.

Regards,

Scott Kampa

Bentley Technical Support

The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be installed after the full installation of the referenced product version (i.e., software download from "SELECT Released Products" section), and they cannot be used with any version other than that specified.

• Bentley WaterGEMS V8i - Cumulative Patch Set for build 08.11.04.50, posted 6/13/13
• Bentley WaterCAD V8i - Cumulative Patch Set for build 08.11.04.50, posted 6/13/13
• Bentley HAMMER V8i - Cumulative Patch Set for build 08.11.004.50, posted 6/13/13
• Bentley StormCAD V8i - Cumulative Patch Set for build 08.11.03.77, posted 6/13/13
• Bentley StormCAD V8i United Kingdom - Cumulative Patch Set for build 08.11.03.77, posted 6/13/13
• Bentley SewerGEMS V8i - Cumulative Patch Set for build 08.11.03.77, posted 6/13/13
• Bentley SewerCAD V8i - Cumulative Patch Set for build 08.11.03.77, posted 6/13/13
• Bentley CivilStorm V8i - Cumulative Patch Set for build 08.11.03.77, posted 6/13/13

There is a slight change to the process of downloading our patch sets. In the search screen, instead of choosing “Enhancements and Updates”, leave the Download Category as “SELECT Released Products”. Make sure the check box is checked for showing dependencies. In the search result, the patch will then show as a dependency of the main product. Note that the patch sets for WaterGEMS and SewerGEMS will be available to download from the "Enhancements and Updates" section as before.

Other items of note:

• All patch sets are cumulative; that is, they contain all available updates for the specific product and version up to the time of posting. You need only install the latest patch set to become current. 
• The software product must be closed prior to installing the update.
• Patch sets are refreshed on SELECTservices Downloads on a monthly basis.
• For further assistance with software updates and patches, please contact technical support at http://www.bentley.com/serviceticketmanager.

Note that these patch sets must only be installed on a machine where you have the specific product version listed above already installed. They are not compatible with any other version. To check what version you have installed, open the product, go to Help > About. The build number will be in the lower left corner of the dialog in brackets.

We are happy to announce that refresh releases are now available to download for Bentley WaterGEMS V8i SELECTseries 4, WaterCAD V8i SELECTseries 4, and HAMMER V8i SELECTseries 4 (build 08.11.04.57) as well as Bentley SewerGEMS V8i SELECTseries 3, Bentley SewerCAD V8i SELECTseries 3, Bentley StormCAD V8i SELECTseries 3, and Bentley CivilStorm V8i SELECTseries 3 (build 08.11.03.83).

These are available for download on selectservices.bentley.com. SELECT subscribers can log in and download the new product directly from Bentley's website. This is a refresh release that will allow for integration with AutoCAD 2014 and also included some minor fixes to the original release. Highlights of these new features can be found in the "Readme.pdf" file found in the installation folder (typically C:\Program Files (x86)\Bentley\(product name).

Thank you.

Regards,

Scott Kampa

Bentley Technical Support

The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be installed after the full installation of the referenced product version (i.e., software download from "SELECT Released Products" section), and they cannot be used with any version other than that specified.

• Bentley WaterGEMS V8i - Cumulative Patch Set for build 08.11.04.50 and build 08.11.04.57, posted 8/15/13
• Bentley WaterCAD V8i - Cumulative Patch Set for build 08.11.04.50 and build 08.11.04.57, posted 8/15/13
• Bentley HAMMER V8i - Cumulative Patch Set for build 08.11.004.50 and build 08.11.04.57, posted 8/15/13
• Bentley StormCAD V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 8/15/13
• Bentley StormCAD V8i United Kingdom - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 8/15/13
• Bentley SewerGEMS V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 8/15/13
• Bentley SewerCAD V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 8/15/13
• Bentley CivilStorm V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 8/15/13

There is a slight change to the process of downloading our patch sets. In the search screen, instead of choosing “Enhancements and Updates”, leave the Download Category as “SELECT Released Products”. Make sure the check box is checked for showing dependencies. In the search result, the patch will then show as a dependency of the main product. Note that the patch sets for WaterGEMS and SewerGEMS will be available to download from the "Enhancements and Updates" section as before.

Refer to the following wiki solution for more details: http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/how-to-download-watergems-watercad-hammer-sewergems-sewercad-civilstorm-stormcad-pondpack-flowmaster-culvertmaster.aspx

Other items of note:

• All patch sets are cumulative; that is, they contain all available updates for the specific product and version up to the time of posting. You need only install the latest patch set to become current. 
• The software product must be closed prior to installing the update.
• Patch sets are refreshed on SELECTservices Downloads on a monthly basis.
• For further assistance with software updates and patches, please contact technical support at http://www.bentley.com/serviceticketmanager.

Note that these patch sets must only be installed on a machine where you have the specific product version listed above already installed. They are not compatible with any other version. To check what version you have installed, open the product, go to Help > About. The build number will be in the lower left corner of the dialog in brackets.

The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be installed after the full installation of the referenced product version (i.e., software download from "SELECT Released Products" section), and they cannot be used with any version other than that specified.

• Bentley WaterGEMS V8i - Cumulative Patch Set for build 08.11.04.50 and build 08.11.04.57, posted 9/17/13
• Bentley WaterCAD V8i - Cumulative Patch Set for build 08.11.04.50 and build 08.11.04.57, posted 9/17/13
• Bentley HAMMER V8i - Cumulative Patch Set for build 08.11.004.50 and build 08.11.04.57, posted 9/17/13
• Bentley StormCAD V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 9/17/13
• Bentley StormCAD V8i United Kingdom - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 9/17/13
• Bentley SewerGEMS V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 9/17/13
• Bentley SewerCAD V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 9/17/13
• Bentley CivilStorm V8i - Cumulative Patch Set for build 08.11.03.77 and build 08.11.03.83, posted 9/17/13

There is a slight change to the process of downloading our patch sets. In the search screen, instead of choosing “Enhancements and Updates”, leave the Download Category as “SELECT Released Products”. Make sure the check box is checked for showing dependencies. In the search result, the patch will then show as a dependency of the main product. Note that the patch sets for WaterGEMS and SewerGEMS will be available to download from the "Enhancements and Updates" section as before.

Refer to the following wiki solution for more details: http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/how-to-download-watergems-watercad-hammer-sewergems-sewercad-civilstorm-stormcad-pondpack-flowmaster-culvertmaster.aspx

Other items of note:

• All patch sets are cumulative; that is, they contain all available updates for the specific product and version up to the time of posting. You need only install the latest patch set to become current. 
• The software product must be closed prior to installing the update.
• Patch sets are refreshed on SELECTservices Downloads on a monthly basis.
• For further assistance with software updates and patches, please contact technical support at http://www.bentley.com/serviceticketmanager.

Note that these patch sets must only be installed on a machine where you have the specific product version listed above already installed. They are not compatible with any other version. To check what version you have installed, open the product, go to Help > About. The build number will be in the lower left corner of the dialog in brackets.

We are happy to announce that refresh releases are now available to download for Bentley SewerGEMS V8i SELECTseries 3, Bentley SewerCAD V8i SELECTseries 3, Bentley StormCAD V8i SELECTseries 3, and Bentley CivilStorm V8i SELECTseries 3 (build 08.11.03.84).

These are available for download on selectservices.bentley.com. SELECT subscribers can log in and download the new product directly from Bentley's website. With this refresh release, Bentley SewerGEMS will now integrate with ArcGIS 10.2. In addition, some minor fixes to the previous release are included as well. Highlights of these new features can be found in the "Readme.pdf" file found in the installation folder (typically C:\Program Files (x86)\Bentley\(product name).

Thank you.

Regards,

The Bentley Technical Support Team

We are happy to announce that refresh releases are now available to download for Bentley WaterGEMS V8i SELECTseries 4, Bentley WaterCAD V8i SELECTseries 4, and Bentley HAMMER V8i SELECTseries 4 (build 08.11.03.58).

These are available for download on selectservices.bentley.com. SELECT subscribers can log in and download the new product directly from Bentley's website. With this refresh release, Bentley WaterGEMS and HAMMER will now integrate with ArcGIS 10.2. In addition, some minor fixes to the previous release are included as well. Highlights of these new features can be found in the "Readme.pdf" file found in the installation folder (typically C:\Program Files (x86)\Bentley\(product name).

Thank you.

Regards,

Bentley Technical Support Team

The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be installed after the full installation of the referenced product version (i.e., software download from "SELECT Released Products" section), and they cannot be used with any version other than that specified.

• Bentley WaterGEMS V8i - Cumulative Patch Set for build 08.11.04.57 and build 08.11.04.58, posted 12/9/13
• Bentley WaterCAD V8i - Cumulative Patch Set for build 08.11.04.57 and build 08.11.04.58, posted 12/9/13
• Bentley HAMMER V8i - Cumulative Patch Set for build 08.11.04.57 and build 08.11.04.58, posted 12/9/13
• Bentley StormCAD V8i - Cumulative Patch Set for build 08.11.03.83 and build 08.11.03.84, posted 12/9/13
• Bentley StormCAD V8i United Kingdom - Cumulative Patch Set for build 08.11.03.83 and build 08.11.03.84, posted 12/9/13
• Bentley SewerGEMS V8i - Cumulative Patch Set for build 08.11.03.83 and build 08.11.03.84, posted 12/9/13
• Bentley SewerCAD V8i - Cumulative Patch Set for build 08.11.03.83 and build 08.11.03.84, posted 12/9/13
• Bentley CivilStorm V8i - Cumulative Patch Set for build 08.11.03.83 and build 08.11.03.84, posted 12/9/13

There is a slight change to the process of downloading our patch sets. In the search screen, instead of choosing “Enhancements and Updates”, leave the Download Category as “SELECT Released Products”. Make sure the check box is checked for showing dependencies. In the search result, the patch will then show as a dependency of the main product. Note that the patch sets for WaterGEMS and SewerGEMS will be available to download from the "Enhancements and Updates" section as before.

Refer to the following wiki solution for more details: http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/how-to-download-watergems-watercad-hammer-sewergems-sewercad-civilstorm-stormcad-pondpack-flowmaster-culvertmaster.aspx

Other items of note:

• All patch sets are cumulative; that is, they contain all available updates for the specific product and version up to the time of posting. You need only install the latest patch set to become current. 
• The software product must be closed prior to installing the update.
• Patch sets are refreshed on SELECTservices Downloads on a monthly basis.
• For further assistance with software updates and patches, please contact technical support at http://www.bentley.com/serviceticketmanager.

Note that these patch sets must only be installed on a machine where you have the specific product version listed above already installed. They are not compatible with any other version. To check what version you have installed, open the product, go to Help > About. The build number will be in the lower left corner of the dialog in brackets.

Regards,

The Bentley Technical Support Team

The most current patch sets for the products listed below are now available to download from the "SELECT Released Products" section of SELECT Downloads webpage. Note that these patch sets must be installed after the full installation of the referenced product version (i.e., software download from "SELECT Released Products" section), and they cannot be used with any version other than that specified.

• Bentley WaterGEMS V8i - Cumulative Patch Set for build 08.11.04.58, posted 3/10/14
• Bentley WaterCAD V8i - Cumulative Patch Set for build 08.11.04.58, posted 3/10/14
• Bentley HAMMER V8i - Cumulative Patch Set for build 08.11.04.58, posted 3/10/14
• Bentley StormCAD V8i - Cumulative Patch Set for build 08.11.03.84, posted 3/10/14
• Bentley StormCAD V8i United Kingdom - Cumulative Patch Set for build 08.11.03.84, posted 3/10/14
• Bentley SewerGEMS V8i - Cumulative Patch Set for build 08.11.03.84, posted 3/10/14
• Bentley SewerCAD V8i - Cumulative Patch Set for build build 08.11.03.84, posted 3/10/14
• Bentley CivilStorm V8i - Cumulative Patch Set for build 08.11.03.84, posted 3/10/14
• Bentley PondPack V8i - Cumulative Patch Set for build 08.11.01.56, posted 3/10/14

There is a slight change to the process of downloading our patch sets. In the search screen, instead of choosing “Enhancements and Updates”, leave the Download Category as “SELECT Released Products”. Make sure the check box is checked for showing dependencies. In the search result, the patch will then show as a dependency of the main product. Note that the patch sets for WaterGEMS and SewerGEMS will be available to download from the "Enhancements and Updates" section as before.

Refer to the following wiki solution for more details: http://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/how-to-download-watergems-watercad-hammer-sewergems-sewercad-civilstorm-stormcad-pondpack-flowmaster-culvertmaster.aspx

Other items of note:

• All patch sets are cumulative; that is, they contain all available updates for the specific product and version up to the time of posting. You need only install the latest patch set to become current. 
• The software product must be closed prior to installing the update.
• Patch sets are refreshed on SELECTservices Downloads on a monthly basis.
• For further assistance with software updates and patches, please contact technical support at http://www.bentley.com/serviceticketmanager.

Note that these patch sets must only be installed on a machine where you have the specific product version listed above already installed. They are not compatible with any other version. To check what version you have installed, open the product, go to Help > About. The build number will be in the lower left corner of the dialog in brackets.

Regards,

The Bentley Technical Support Team

Jonathan will be presenting several courses in the Hydraulics and Hydrology track at the Bentley LEARNing Conference in Birmingham, UK.

His sessions include:

• Introduction to Subsurface Utilities Engineering

• Introduction to Civil Storm

• QuickStart for Subsurface Utility Modeling

• Advanced Subsurface Utility Modeling

See the complete Birmingham agenda and register for the June 3^rd event HERE.  

Plus, get to know Jonathan before you go:

(Please visit the site to view this video)

V8i SELECTseries 4 release of SewerGEMS/SewerCAD/CivilStorm/StormCAD

We are pleased to announce that V8I SELECTseries 4 releases are now available for Bentley SewerGEMS, Bentley SewerCAD, Bentley CivilStorm, and Bentley StormCAD.  As a benefit to SELECT subscribers, these new releases can be downloaded at any time from the SELECTservices site.

Highlights regarding the new features for each of these products can be found on their respective “What’s new” pages on Bentley.com:

• Bentley SewerGEMS
• Bentley SewerCAD
• Bentley CivilStorm
• Bentley StormCAD

We are offering a free webinar later this month (for various times and languages) where we will discuss these new features in more detail.  You can find the session that fits you best through our event registration site.

We hope that these new releases will help you find continued success!

Regards,

Bentley Technical Support